Active single 18 inch subwoofer aluminum alloy sound column combination speaker
Model:SUB18,H-404 Guangzhou Jodie Audio Equipment Co., Ltd.
1. The tone is delicate and clear. It is small and exquisite in size, with a fashionable and high-end appearance. 2. The woofer uses a 4.5-inch 25mm voice coil unit. 3. The tweeter uses a neodymium magnet 25mm voice coil high-frequency unit. 4. The cabinet is made of aluminum alloy and the surface is treated with black wear-resistant spray paint. 5. The tweeter adopts a horn design, with a wide coverage angle and strong penetration. 6. The appearance is avant-garde, with a steel protective mesh with a dust-proof screen. 7. The precisely designed crossover can optimize the power response and the mid-frequency performance of the vocal part. 1. The 18-inch 220-magnet 100-core woofer is made of a composite of multiple fibers. 2. The specially designed paper cone woofer operates under the premise of precisely designed bass port harmonic channels. 3. The low-frequency linear vibration amplitude is large and the fidelity is high. 4. Special voice coil material and cooling magnetic liquid are used. 5. The vent design is flexible and changeable, allowing for the placement of sound columns and accessories. 6. The cabinet is made of 18mm thick birch plywood, which is sturdy and durable. 7. Professional handle design with universal wheels for convenient and flexible transportation. 8. Active DSP amplifier design. 9. The cabinet is made by precise CNC machining combined with complex in-slot wedge jointing technology.
System: Full-range column speaker
1. Tweeter: 1x25mm neodymium magnet unit
2. Woofer: 4x4.5" units
3. Frequency response: 85 Hz - 20KHz (-3dB)
4. Rated power: 300W
5. Nominal impedance: 8Ω
6. Sensitivity: 96 dB/1W/1M
7. Maximum sound pressure: 123 dB
8. Coverage angle: Horizontal 80°, Vertical 80°
10. Input connector: Speakon NL4×2
12. Cabinet material: Made of aluminum alloy
13. Paint treatment: Environmentally friendly black paint treatment
14. Weight: 12Kg
15. Dimensions (W*D*H): 124*136*625mm
1. Mode: SUB BASS
2. Drive mode: Active built-in drive
3. Frequency response range: 35Hz - 300Hz ± 3dB
4. Unit composition: 1x18" 220 magnet 100mm woofer
5. Rated power (RMS): 700W
7. Sensitivity (1w/1m): 103dB
8. Maximum sound pressure level: 130dB (continuous), 136dB (peak)
9. Impedance: 8 ohms
10. Material: 18mm birch plywood
11. Surface: Black wear-resistant polyurea eco-friendly spray paint
12. Grille: Black metal mesh with gauze
13. Connection plug: Speakon NL4×2
14. Net weight: 43.5 KG
15. Physical dimensions: (W*D*H) 520mm * 655mm * 705mm
Stereo output power: 2×800W 8Ω, 2×1200W 4Ω;
Frequency response: 20Hz - 25KHz (+/-0.5dB); THD+N (rated power, 4Ω, 1KHz) <0.1%;
Signal-to-noise ratio: >110dB;
Input impedance: 10KΩ Balanced / 10KΩ Unbalanced;
Damping factor: 800;
Input sensitivity: 1V;
Input interface: 3-pin XLR interface;
Output interface: SPEAKON;
DSP: 48KHZ sampling, 2 in and 2 out;
Input dynamic expansion; 16-band PEQ on input. 8-band PEQ on output;
Output compression; high-pass and low-pass filters;
Input and output grouping; four scene preset options.
Dimensions: 155*330 mm
* Page content update time:2025-06-05 16:37:34,The relevant information on the website is for reference only. All products are subject to physical inspection and are subject to change without prior notice.
