Conference room speaker
Model:TF-8A Guangzhou Jodie Audio Equipment Co., Ltd.
*Scope of application: Meeting rooms, multifunctional halls, auditoriums, theaters, cinemas, KTVs, and soundproofing.
*Adopting a polygonal box structure design to meet various angles of use.
*Adopting an iron pot frame unit design to meet high dynamic and high-power usage, with good heat dissipation, ensuring system stability.
*The tone is delicate and the clarity is good. Compact and exquisite in size, stylish and high-end in appearance
*8-inch lightweight high-power differential drive bass unit* 1.34-inch circular polyethylene diaphragm compression tweeter unit.
*The box is made of 15mm high-density board and the surface is treated with black wear-resistant spray paint.
*90 ° x70 ° coverage angle design, with uniform and smooth axial and off-axis response
*Avant garde appearance, steel protective iron mesh with dust-proof surface mesh.
*A precisely designed frequency divider can optimize power response and mid frequency performance in the vocal section.
*Multiple hanging methods for convenient installation.
System Type: Two-way Full Range
1. System Unit; Low Frequency Unit: 1x 8'' 35-core 120 magnet
2. High Frequency Unit: 1x 1.35' 34mm voice coil
3. Frequency Range (+3dB): 65 Hz - 20 KHz
4. Sensitivity (1w/1m): 92 dB
5. Rated Impedance: 8 Ω
6. Crossover Point: 2.2 KHz
7. Maximum Sound Pressure Level; (Continuous/Peak): 112 dB / 120 dB
8. Rated Power (RMS): 200 W/400 W/800 W (Continuous/Music Signal/Peak)
9. Coverage Angle: 90° (Horizontal) x 70° (Vertical)
10. Panel: 15mm thick high-density board
11. Surface: Black wear-resistant eco-friendly water-based paint
12. Cover: Black iron mesh with mesh fabric
13. Physical Dimensions: (W*D*H): 250mm x 260mm x 435mm
14. Connector: Speakon NL4×2
15. Net Weight: 8.9 KG
* Page content update time:2025-06-06 16:50:17,The relevant information on the website is for reference only. All products are subject to physical inspection and are subject to change without prior notice.
