Professional speaker
Model:TF-10 Guangzhou Jodie Audio Equipment Co., Ltd.
*Scope of application: Meeting rooms, multifunctional halls, auditoriums, theaters, cinemas, KTVs, and soundproofing.
*Adopting a polygonal box structure design to meet various angles of use.
*Adopting a die cast aluminum basin frame unit design to meet high dynamic and high-power usage, with good heat dissipation and ensuring system stability.
*The tone is delicate and the clarity is good. Compact and exquisite in size, with a stylish and high-end appearance.
*10 inch lightweight high-power differential drive bass unit.
*1.34-inch circular polyethylene diaphragm compression tweeter unit.
*The box is made of 15mm high-density board and the surface is treated with black wear-resistant spray paint.
*90 ° x70 ° coverage angle design, with uniform and smooth axial and off-axis response.
*Avant garde appearance, steel protective iron mesh with dust-proof surface mesh.
*A precisely designed frequency divider can optimize power response and mid frequency performance in the vocal section.
*Multiple hanging methods for convenient installation.
System type: Two-way full-range
1. Low-frequency unit: 1x 10'' 65mm voice coil
2. High-frequency unit: 1x 1.35' 34mm voice coil
3. Frequency range (+3dB): 55 Hz - 20 KHz
4. Sensitivity (1w/1m): 96 dB
5. Rated impedance: 8 Ω
6. Crossover point: 1.9 KHz
7. Maximum sound pressure level: (continuous/peak) 116 dB / 122 dB
8. Rated power (RMS): 300 W/600 W/1200 W (continuous/musical signal/peak)
9. Coverage angle: 90° (H) x 70° (V)
10. Panel: 15mm thick high-density board
11. Surface: Black wear-resistant and environmentally friendly water-based paint
12. Cover: Black iron mesh with mesh
13. Physical dimensions: (W*D*H): 300mm x 310mm x 510mm
14. Net weight: 14.25 KG
15. Connector: Speakon NL4×2
* Page content update time:2025-06-06 16:56:45,The relevant information on the website is for reference only. All products are subject to physical inspection and are subject to change without prior notice.
